How to Fix Apple TV Remote Volume Not Working? Explained!

The moment when Apple TV remote or Siri Remote becomes unresponsive, it is very perplexing. Apple TV remote not working means deprivation from access to TV which means no access to news, live sports events, and so on. It can be quite exasperating and extremely irritating. How to Fix Apple TV Remote Volume Not Working? Find out in this article.

More often, the remote that comes out of the box is OK and ready to use. And if it doesn’t work, it means that there is a fault with the hardware, or the battery might have drained. The hardware fault needs replacement, whereas if the battery is drained, you need to charge it using the supplied lighting cable.

In rare cases, the volume button of the Apple TV remote volume stops working. This is all due to a bug being developed. The good thing is that this bug can be done away with by restarting the remote. And the method to restart Apple TV remote is explained below.

How to Fix Apple Tv Remote Volume Not Working?

As such, no definite and sole reason can be attributed to the Apple TV remote volume not working. It can be either due to one reason or due to more than one reason. Given below is a list of some of the reasons that could lead to Apple TV not working. 

1. Restart Your Remote

1. Press and hold the TV/ Control clear button and the Volume down button simultaneously at the same time. Hold it for a while, for about Five seconds, till the status light on your TV screen turns on and off again. 

2. Now, release the button. You have to wait for Ten seconds for the retrieval of the connection lost notifications. The said notification will appear in the corner of your TV screen.

3. Wait till the remote restarts. You can use your remote when the connected notification appears. 

2. Restart Your Apple TV

Restarting your Apple Tv will help in resolving many random glitches. Hold the Back and Menu buttons at the same time with the TV button to restart your device.

Hold till the apple indicator blinks rapidly. Once you see the light blinking, unplug the AppleTv from the wall.

Wait for a while, about five seconds. Plug in again and power on the device. On the successful reboot, you will see the Apple logo on the screen.

3. Update the Software: 

Check you your software is updated and up to date. Usually, a notification pops up when a new software update is available. You can also check the availability of the update manually.

Once you find that the update is available, update to the latest version available.

4. Charge the Remote: 

Check if the battery of your remote is changed. If it is not charged up. It may be acting up. Here is how you can check: 

1. Go to the settings.

2. Go to Remotes and Devices.

3. And the remaining battery level. 

Connect the remote to the charger for at least 30 minutes before checking the battery level.

5. Move Closer to the Apple TV

Some Tv models use IR InfraRed to control the Apple TV, contrary to Bluetooth. Since Bluetooth can control and function from any practical distance. At the same time, the IR has distance bondages. So it is better to move closer to the AppleTV. It might help ApplTv remote work smoothly.

6. Clean the IR Sensors: 

Check if the sensors are either obscured or covered by any foreign material or dirt which does not allow the signal to pass through. Check the IR sensors on the TV and the Transmitters on the Remote. Clean them up, and remove any stuff that blocks the signal. 

7. Allow HDMI – CEC:

Enabling the HDMI – CEC cabling will allow bi-directional communication. HDMI is a technology that directly controls the devices like AppleTV. If your device supports the HDMI -CEC technology, enable it, it will bypass the IR-related problems and directly send commands to AppleTV.

8. Use iPhone or iPad as Remote:

If you are using iPhone or iPad with the same apple id over the same wi fi network. You can use iPhone or iPad, whichever you have, as an alternative remote. 

On iOS or iPadOS, swipe down to get access to the control panel, and you will find the remote icon. Tap and select it. 

9. Pair Again Your Remote: 

If even restarting does not work for you, all you can do is pair your remote again. In case it fails to sync, check whether you are using the latest version of tvOS available. If not, get one. 

10: Contact Apple Support:

If none of the above helps you, the lone option you are left with is to contact Apple support for the redressal of your grievance. If the product is in the warranty period, you will surely get a solution for your product.

How to Fix Apple TV Remote Volume Not Working?

Wrapping Up:

It has come to the fore that Apple TV remote volume not working can be fixed by restarting the Apple Tv remote or Siri Tv remote, provided it is not working due to hardware malfunctioning or battery draining. In a nutshell, there are more than one ways to fix the Apple TV remote volume not working properly. And you can choose the one that will work for you.

Frequently Asked Questions: