How to Fix Fanimation Remote Not Working? Explained

Are you one among those who are very often worried about ceiling fan remotes? Ceiling fan remotes are a matter of great concern for people across the world. Very often, you will find that the ceiling fan ceases to work due to many reasons. The same can be said about the Fanimation remote not working. It is quite irritating and disturbing to encounter such errors. But then, there is a way out and a solution to each and every problem, irrespective of the fact of what sort and of what gravity the problem is. Let us find out the ways to fix the Fanimation remote not working.

Fanimation is deemed to be a true blend of beauty and functionality. The Fanimation ceiling fan is known for its style and technology-driven control, which is pleasing to the eyes and convenient to control. The Fanimation ceiling fan has been in vogue for the last thirty years, thereby having a considerable audience owing to its design, style, and work. 

As and when you find Fanimation remote not working. Since this is very often seen that at any given point in time, it ceases to work. Here is how you can fix Fanimation remote not working.

Why is Fanimation Remote Not Working?

As such, there is no certain and definite reason that could lead to Fanimation remote not working. However, there are some possible causes that can lead to this error. Given below are some of the possible causes enlisted.

1. Remote is Out of Range:  For the proper working of the remote, it is important to use it from a stipulated and well-defined range from where the remote will work. In case you are using it from a remote location. It will not work. 

2. Batteries have Drained: Another cause for the Fanimation remote not working could be drained batteries. When the batteries of your Fanimatin remote run out of power, it will automatically stop working. 

3. Mismatched Frequency: Another possible cause for Fanimation remote not working could be the mismatched frequencies between the ceiling fan and the remote. The mismatch in the frequency would lead to Fanimation remote not working.

How to Fix Fanimation Remote Not Working?

Since the possible causes are explained above in the article, each of these problems needs to be fixed differently. Here is how you can fix the Fanimation remote not working. 

1. Remote is Out of Range

As and when you try to control the remote from a range that is not compatible. It will not work. Therefore, use the remote within its operating range. If you use it within the compatible range, it will work properly. However, the operating range varies from fan to fan. You can check it manually by using it in different locations. 

2. Use Charged Batteries

Once the batteries of your Fanimation remote run out of charge. You need a power source to generate the signals to command the ceiling fans for performing a particular function. Continuous and longer usage of the remote will deplete and drain out the batteries, thereby running your remote totally useless. 

In such a case, you are supposed to change the battery of your remote and install a new set of charged batteries. Once you install a new set of batteries, your remote will start working without any delay or trouble. This will do away with the problem Fanimation remote not working. 

You don’t have to toil hard to get a battery since it is readily available in almost each and every vicinity. 

3. Check and Resync the Frequency of Your Fan and Remote

The mismatched frequency can lead to Fanimation remote not working. You must check the frequency. Check the dip switches on both the ceiling fan remote and the ceiling fan itself. The combination of these dip switches must match for proper working. However, the style and number of the dip switches vary from one fan model to another. 

4. Reset the Fanimation Remote

Even after resyncing the frequencies, changing the drained batteries with a new pair of charged batteries, and using the remote from an operating range, if the problem persists. You can try resetting the Fanimation remote. Here is how you can reset the Fanimation remote by following the given steps. 

1. Turn Off the Ceiling Fan with the help of the Remote, provided the remote is working.

2. Press the off button on the fan. Press it for 10 seconds before you release it. 

3. Wait for about 20 seconds before you turn it on with the help of the remote, provided it is working. 

Once you follow these steps, you can easily reset the Fanimation remote.

Wrapping Up

So it has come to the fore that Faniation remote not working can be the attribution of more than one cause. But in most cases, you would come to know the reason for Fanimation Remote not working. All you can do is check if all these things are in their proper place and therefore are working properly.  Wherever the fault lies, you can rectify that accordingly, as has been explained in the article above. 

 I hope this article will be of some help to you. In case I have missed something, you can let us know by writing in the comments section. We also look forward to your valuable comments. You can visit our website for content like this and much more. 

Frequently Asked Questions